Titanium GRADE 1 / VT 1-00
Unalloyed alloy GRADE 1 / BT 1-00 refers to materials with low strength. In addition to titanium, the proportion of which can reach 99.9%, it contains a small amount of impurities.
than VT 1-0, the amount of impurities. This reduces strength but increases ductility.
Special properties
The high plasticity of the material allows for a full range of semi-finished products obtained by deformation, including foil, tape, sheet, strip, plate, rod, profile, pipe, stamped billet. It is possible to manufacture ingots.
toughness and excellent weldability.
The strength of an alloy can be increased by work hardening. True, at the same time, its plasticity decreases, moreover, more significantly than the increase in strength.
Applications
Sheet, profiles, or titanium rod can be purchased for use in the production of degassed welding wire, niobium- titanium alloys with superconductivity, low-load parts with a complex configuration and operating in the temperature range from -253 to +150 degrees, electrodes for vacuum-arc remelting, used as a charge for shaped casting.
Chemical composition of Titanium Grade 1
C | H | O | N | Fe | Total mixins | Other elements | Ti |
<0.08 | <0.015 | <0.18 | <0 ,05 | <0.20 | <0,4
| <0,1 | Other |
Grade 1 Titanium Mechanical Properties
| Tensile strength | 35 ksi | 240 MPa | |
| Yield strength (0.2% deviation) | 20 ksi | 138 MPa | |
| Elongation, min. | 24 % | ||
Delivery forms Titanium Grade 1 / VT 1-00
Titanium Sheet Titanium Grade 1 / W 1-00 0.5 mm to 100 mm Titanium rod Titanium Grade 1 / W 1-00 Diameter from 1.5mm to 250mm Titanium pipe Titan Grade 1 / W 1-00 Diameter 6 – 280 mm wall thickness 0.5 – 45 mm
Titanium wire Titanium Grade 1 / W 1-00 Diameter from 0.1 mm up to 6.0 mm Titanium Tape Titanium Grade 1 / W 1-00 Thickness from 0.1mm to 4mm
Reviews