René 125 Nickel Alloy
General Technical Characteristics
René 125 is a heat-resistant cast nickel-based superalloy developed for manufacturing gas turbine components operating at high temperatures and under significant mechanical loads. The material offers high-temperature strength and creep resistance, making it suitable for critical components used in aerospace and power generation equipment.
Chemical composition of René 125, % (typical values):
- Nickel (Ni) — balance;
- Chromium (Cr) — approximately 8.5–8.9%;
- Cobalt (Co) — approximately 10%;
- Tungsten (W) — approximately 7–8%;
- Aluminum (Al) — approximately 4.7–4.8%;
- Titanium (Ti) — up to 2.5%;
- Molybdenum (Mo) — up to 2%;
- Tantalum (Ta) — approximately 3.8%;
- Hafnium (Hf) — approximately 1.4%;
- Carbon (C) — approximately 0.1%.
The actual content of alloying elements may vary depending on the applicable specification and manufacturing process.
The mechanical properties of René 125 depend on heat treatment, casting structure, and operating conditions. The alloy is characterized by high long-term strength, creep resistance, and the ability to retain its performance characteristics at elevated temperatures. Specific values for tensile strength, yield strength, and elongation should be determined from the technical documentation for the relevant material batch.
Applications
René 125 nickel alloy is primarily used in the aerospace industry and gas turbine equipment manufacturing. Its main applications include turbine rotor blades, particularly components with complex internal cooling passages, as well as other hot-section components of gas turbine engines.
The material is suitable for critical parts exposed to high temperatures, centrifugal forces, and sustained mechanical loads. René 125 is also relevant to power generation engineering, where cast heat-resistant materials with high resistance to deformation during long-term operation are required.
Features
The main features of René 125 include high-temperature strength, creep resistance, and suitability for manufacturing complex cast components. The combination of a nickel-based matrix with tungsten, cobalt, aluminum, and tantalum provides properties required for operation in the hot sections of turbines.
To improve oxidation resistance, the alloy may be used with protective aluminide coatings. However, its mechanical characteristics and resistance to failure under sustained loads depend significantly on heat treatment and material condition. René 125 is primarily intended for cast components and requires specialized manufacturing and processing procedures.
Order René 125 nickel alloy from ASYNT.NET! Contact our specialists to inquire about current pricing, availability, supply forms, and technical specifications for your manufacturing requirements.
