Aluminum alloy EN AW 2007
If you are looking for a material that is highly durable, resistant to corrosion processes and any aggressive external influences, EN AW 2007 aluminum alloy and products based on it will be an excellent choice.
Features
Durable EN AW 2007 aluminum alloy contains components such as copper, iron, manganese, magnesium , chromium, silicon and other alloying additives. Thanks to this, it was possible to achieve excellent technical and operational characteristics of this material, the scope of which is very large.
Aluminum alloy parts are all kinds of round and shaped pipes , channels, corners, tapes, sheets are in demand in such industries as:
building;
decoration and design;
· chemical industry;
· food industry;
medicine;
Automotive;
aircraft industry and so on.
on its basis, rather complex structures) and is easy to process. At the same time, experts note the preservation of the properties and parameters of the aluminum alloy in a wide temperature range. For all purchase inquiries, please contact the phone numbers listed on the website.
Alloy chemistry EN AW-2007
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Other elements | Al |
<0, 8 | <0.8 | 3.3-4.6 | 0.5-1.0 | 0.4-1.8 | <0,1 | <0,2 | <0, 2 | <0.5 | Other |
Mechanical alloy properties EN AW-2007
Material state | T3 | T4 |
Thickness, mm | 30-80 | <80 |
Tensile strength (tensile strength), min., Rm, MPa | 400 | 390 |
Yield strength, min., Rp0.2 in N/mm 2 | 250 | 260 |
Relative elongation, A50 mm, min., % | 10 | 9 |
Brinell, HB max. | 100 | 105 |
Modulus of elasticity, MPa | 71 000 |
Thermal expansion coefficient, μm/m-°C | 23,6 |
Thermal conductivity, W/mK |
134
Electrical resistance, Ωmm2/m | 0.051 |