Steel Round Bar 1.7238 / 50CrMo4 / 50KhM

Steel round bar grade 1.7238 (European equivalent 50CrMo4, Russian equivalent 50KhM) is a structural alloyed chromium-molybdenum steel designed for manufacturing highly loaded machine-building components. This grade belongs to the heat-treatable steels and provides high strength combined with good toughness after heat treatment.

Chemical Composition of 1.7238 / 50CrMo4 / 50KhM Steel (in percentages):

• Carbon (C): 0.46-0.54%
• Chromium (Cr): 0.90-1.20%
• Molybdenum (Mo): 0.15-0.30%
• Manganese (Mn): 0.50-0.80%
• Silicon (Si): 0.17-0.37%
• Phosphorus (P): max 0.035%
• Sulfur (S): max 0.035%

Mechanical Properties:

• Yield strength: min 750 MPa
• Ultimate tensile strength: 1000-1200 MPa
• Elongation: min 11%
• Reduction of area: min 45%
• Hardness after tempering: 28-34 HRC
• Hardness after quenching: 56-62 HRC

Applications:

Steel 1.7238 is widely used for manufacturing:

• Crankshafts
• Connecting rods
• Axles
• Shafts
• Spindles
• High-strength bolts
• Piston rods
• Gears
• Couplings
• Bandages
• Levers and other highly loaded components

Features:

1. High hardenability due to chromium and molybdenum content
2. Excellent combination of strength and toughness after heat treatment
3. Good machinability in annealed condition
4. Ability to withstand significant alternating loads
5. High torsional and bending strength
6. Good weldability when following proper preheating procedures

Technical Specifications:

• Density: 7.85 g/cm³
• Quenching temperature: 820-860°C
• Tempering temperature: 530-680°C
• Forging temperature: 1150-850°C
• Thermal conductivity: 42 W/(m·K)
• Modulus of elasticity: 210 GPa
• Supply condition hardness: max 255 HB

The material is supplied as round bars in various diameters. Steel 1.7238 is characterized by uniform properties throughout the cross-section and high surface quality. Each batch is accompanied by a quality certificate confirming the material’s compliance with the specified characteristics.

To achieve optimal mechanical properties, it is recommended to perform heat treatment in the form of quenching followed by high tempering (improvement). During machining, modern cutting tools and coolant should be used to ensure the required surface quality.

Steel 1.7238 is widely used in automotive, tractor, agricultural, and other mechanical engineering industries where high strength and reliability of components under dynamic loads are required.

Forms made of steel 1.7238 / 50CrMo4 / 50KhM