• Mon - Sat : 9:00 - 18:00
  • Sun : day off
  • sale@asynt.net
  • +38 (044) 223 87 83
  • +38 (093) 237 64 50

Aluminum alloy EN AW 5083 / AMG5

» Products » Non-ferrous metals and alloys » Aluminum » Aluminum alloy EN AW 5083 / AMG5

Aluminum alloy EN AW 5083 / AMG5

The goods can be picked up by self-delivery at metal depots in Kyiv. Also, in agreement with the customer, rolled metal products can be delivered to any region of Ukraine

  • Characteristics
  • Description

Aluminum alloy delivery forms EN AW 5083

Aluminum grade

Delivery forms

EN AW 5083

Aluminum tape thickness from 0.05 to 4mm , width from 5mm to 1600mm

Aluminum sheet thickness from 0.2 to 10mm, width up to 1600mm, length up to 7000mm

Aluminum plate thickness from 10 to 150mm, width up to 1600mm, length up to 7000mm

Aluminum circle diameter up to 800mm

Aluminum hexagon diameter up to 500mm

Aluminum square thickness up to 500mm

Aluminum pipes with a diameter of 40mm to 400mm

Aluminum corrugated th sheet thickness from 0.2 to 4mm, width up to 1600mm, length up to 7000mm

Aluminum square tubes sizes from 10x10mm to 150x150mm

Aluminum profile pipes sizes from 20x10mm to 200x100mm

Equal-shelf aluminum corners from 10x10mm to 100x100mm

Aluminum corners unequal-shelf sizes from 20x10mm to 200x100mm

Aluminum alloy EN AW 5083 / AMG5


A-Sintez offers an aluminum-based alloy EN AW 5083 at an affordable price, which is the closest alternative to the material marked AMG5. This AW 5083 grade contains manganese additives (in the range of 4.4-4.6%), which brings it closer in terms of operational parameters to the grades of AMG5 alloys.
At the same time, the advantage of this particular grade of alloy is better ductility, as well as simpler and easier weldability, which allows create rather complex structural elements on its basis. The more affordable cost can also be considered an advantage.
Features
It has long been known that the strength of aluminum is quite high, which allows products based on it to be used as widely as possible. The tensile strength of aluminum depends on the brand of alloys, and the aluminum alloy EN AW 5083 / AMG5 has practically no competitors in this regard.
It is quite light (specific gravity does not exceed 2.7 g/cm3) and resistant to deformation, due to the presence of alloying magnesium, manganese, zinc, copper additives. We note the highest corrosion resistance and low production costs, as well as the simplicity and ease of processing.
Application
Aluminum products based on this alloy are used in the manufacture of aircraft, automobiles, marine yachts and ships, machinery and equipment. They are in demand in construction, advertising production, architecture, residential and industrial construction of buildings and structures.


Alloy chemistry alloy EN AW 5083

Cr

Cu

Fe

Mg

Mn

Si

Ti

Zn

Other elements

Al

0.05-0.25

<0,10

<0,40

4.0-4.9

0 ,4-1,0

<0,40

<0.15

<0.25

<0,15

Other


Alloy mechanical properties EN AW 5083

Material state

H18/H28

H14/H24

Tensile strength (tensile strength), min., Rm, MPa

345

320

Yield strength, min., Rp0.2 in N/mm2

280

250

Relative elongation, min., %

9

Didn't find a suitable product?

For more information, please contact us or leave your contact details and we will call you back.