Aluminum alloy B95 / EN AW 7075
Aluminum alloy 7075 is a popular aluminum-based structural material, which also contains such alloying components as: p>
zinc;
copper;
magnesium.
B95 alloy is considered one of the hardest and most durable of all existing aluminum alloys. Strength, hardness, reliability and durability predetermined the scope of use: B95 aluminum alloy is mainly used in the construction of high-load structures that are constantly under high compressive pressure.
solid crystalline formations, which are the basis of rigidity. At the same time, the B95 alloy is limited in such a parameter as plasticity; it tolerates any operations associated with notches rather “poorly”.
If there is sufficient point compressive stress, these metal grades exhibit decrease in corrosion resistance – this must be taken into account when planning structures and individual elements.
For all purchase questions, as well as consultations, you can contact to the specialists of A-Synthesis. We will help you choose and buy the aluminum alloy profile you need at the most affordable prices.
Alloy chemistry EN AW 7075
Cr | Cu | Fe | Mg | Mn | Si | Ti | Zn | Other elements | Al |
0.18-0 ,28 | 1.2-2.0 | <0.50 | 2.10-2.90 | <0.30 | <0,40 | <0,20 | 5.1-6.1 | <0.15 | Other |
Alloy mechanical properties EN AW 7075
| Material state | T6 |
| Tensile strength (tensile strength), min., Rm, MPa | 560 |
| Yield strength, min., Rp0.2 in N/mm2 | 500 |
| Relative elongation, min., % | 7 |
| Brinell hardness, HB max. | 150 |
| Modulus of elasticity, MPa | 71 700 |
| Thermal expansion coefficient, μm/m-°C | 23,6 |
| Thermal conductivity, W/mK | 130 |
| ele critical resistance, Ωmm2/m | 0.052
|
- Delivery forms for aluminum alloy B95 / EN AW 7075
Aluminum grade Delivery forms В95 / EN AW7075 Aluminum tape thickness from 0.05 to 4mm, width from 5mm to 1600mm Aluminum sheet thickness from 0.2 to 10mm, width up to 1600mm, length up to 7000mm
Aluminum plate thickness from 10 to 150mm, width up to 1600mm, length up to 7000mm
Aluminum circle diameter up to 800mm
Aluminum hexagon diameter up to 500mm
Aluminum square thickness up to 500mm
40mm to 400mm
Aluminum corrugated sheet thickness from 0.2 to 4mm, width up to 1600mm, length up to 7000mm
Aluminum square tubes sizes from 10x10mm to 150x150mm
Aluminum profile pipes size s from 20x10mm to 200x100mm
Equal-shelf aluminum corners from 10x10mm to 100x100mm
Aluminum corners unequal-shelf sizes from 20x10mm to 200x100mm
Reviews