Steel sheetS460N / 1.8901
Forms of delivery of steelS460Nin sheets | ||||
Steel grade | Certification | Dimensions [mm] | ||
Thickness | Width | Length to | ||
S460N/ 1.8901 | 3.1 acc. to EN 10204, AD 2000 W1 | 4 – 200 | 1000 – 3000 | 16000 |
Forms of delivery of steelS460Nin sheets | ||||
Steel grade | Certification | Dimensions [mm] | ||
Thickness | Width | Length to | ||
S460N/ 1.8901 | 3.1 acc. to EN 10204, AD 2000 W1 | 4 – 200 | 1000 – 3000 | 16000 |
Steel sheet S 460N DIN EN 10025-3
Sheet steel, grade S 460N, produced in full compliance with the European standard EN 10025-3, refers to hot-rolled fine-grained structural steels of ordinary quality, normalized by rolling at temperatures up to 900 degrees, followed by cooling under natural temperature conditions.
It is possible to order S 460N sheet steel for the production of shaped steel, the conditions for further operation of which require high strength and resistance to low temperatures.
Special properties
The price of sheet steel of this grade is fully consistent with its performance characteristics, determined by:
– quite high yield strength, at the level of 460 megapixels, at natural temperature;
– significant impact strength, with an indicator of 55 joules, at a temperature of +20 degrees, and 40 joules, at a temperature of -20 degrees Des structurization under shock loads can occur at a temperature of -50 degrees;
– density of 7.85 grams per cubic centimeter;
– excellent weldability, without limits.
Fields of application
You can buy S 460N steel for use in the construction industry, including for manufacturing underwater structures, shipbuilding, mechanical engineering, energy.
Chemical composition S460N (1.8901): EN 10025-3-2004
C | Si | Mn | Ni | P | S | Cr | Mo | V | N | Nb | Ti | Al | Cu | CEV |
max 0.2 | max 0.6 | 1 – 1.7 | max 0.8 | max 0.03 | max 0.025 | max 0.3 | max 0.1 | max 0.2 | max 0.025 | max 0.05 | max 0.05 | max 0.02 | max 0.55 | max 0.55 |
Mechanical properties of steel S460N (1.8901)
Nominal thickness (mm): | to 100 | 100 – 200 | |||||||||
Rm- Tensile strength (MPa) | 540-720 | 530-710 | |||||||||
Nominal thickness (mm): | to 16 | 16 – 40 | 40 – 63 | 63 – 80 | 80 – 100 | 100 – 150 | 150 – 200 | ||||
ReH- Minimum yield strength (MPa) | 460 | 440 | 430 | 410 | 400 | 380 | 370 | ||||
KV- Impact energy (J) longitud., (+N) | +20° | 0° | -10° | -20° | |||||||
KV- Impact energy (J) tr ansverse, (+N) | +20° | 0° | -10° | -20° | ||
Nominal thickness (mm): | to 16 | 16 – 40 | 40 – 63 | 63 – 80 | 80 – 200 | |
A- Min. elongation Lo = 5.65 ? So (%) | 17 | 17 | 17 |
Для отримання більш детальної інформації, зв'яжіться з нами або залиште свої контактні дані і ми обов'язково Вам передзвонимо.